1 Inch Sanitary Ball Valves Three Way PTFE Sealing Material For
Food Line
All-inclusive tee design, no stranded high clean, meet the
requirement of CIP and SIP sterillization and cleaning, and heat
resistance of 180°C, the highest pressure 10 bar.
Available with a variety of structures, such as electric pneumatic,
stainless steel, horizontal vertical pneumatic, key manually
handle, can also be equipped with the control unit, locata,
position sensor and other conpatible automatic control system.
Valve body can be replaced in any connections, adnd the length will
not change.
Connection: clamp, weld, thread, flange.
Material for the part contacted with media is 304/636L, other part
is 304.
Sealing material: PTFE, it is according to FDA117.2600.
Size: 1/2"-4" / DN10-100 Standard: 3A,DIN, SMS, IDF, RJT, BPE, ISO
Size :
Usually 1" - 4", any size is demandable
Fitting ends :
BS, DIN, SMS, A270, Weld ends, Male ends and Clamp ends
Working pressure :
* -0.9 to 10 Bar for cast body
* -0.9 to 20 Bar for forged body
Working temperature :
-10oC up to 150oC
Features:
The valve is lead free and Sanitary, it can be used for drinking
water, the pharmaceutical and food industries. Stainless steel
sanitary 3-way ball valves are used in a wide variety of
high-pressure applications. A full, unrestricted flow allows no
product restrictions through the valve, allowing easy diversion. We
offer three way ball valves made of T316L stainless steel with PTFE
seats that are easily removed. Clamp and weld ends are standard.
Other connections are available upon request. Ball valves meet 3A
requirements. L-Port is standard, but T-Port is available upon
request.
Sterilization temperature reached 150℃
Valve material:SUS 304 Stainless Steel
Port size: 2"
Sealing material: Polytetrafluoroethene
Connection: Clamp
Surface finish: ＜0.4μm
Work Pressure: 0 — 1.6MPa / 232psi
Applicable Temperture: -10℃ ~ +135℃
Applicable Medium:Water, Oil
Operation:Manual
Product certification:ISO, DAS CERTIFICATION
Technical Details:
| Steel material | Product wetted steel parts |
AISI 304 or 316L
| Provided with material inspection report |
| Other steel parts | AISI 304 |
| Seal material | Standard | Teflon (PTFE) | All seal materials comply with FDA 21CFR117.2600 |
| Options | N/A |
| Pressure | Working pressure | ≤145psi (10bar) |
| Supply pressure for air actuator | 70 ~ 116psi (5 ~ 8bar) |
| Temperature | Working temperature | -4 ~ 302°F (-20 ~ 150°C), -22 ~ 392°F (-30 ~ 200°C) option. |
| Surface treatment | Inside surface treatment | Ra 16 ~ 32µin (0.4 ~ 0.8µm) |
| Outside surface treatment | Ra 32 ~ 64µin (0.8 ~ 1.6µm) |
| Connection | End connections can be butt-welded, sanitary clamp, male and female
threaded, flanged, I-line or others upon request. |
| Standard or Nonstandard | Standard |
| Power | Manual |
| Media | Water, Beverage, Pharmacy, Milk, Beer, Juice |
| Application | General, Food and Beverage, Pharmaceutical, General Industry, etc. |
| Material | Stainless Steel |
| Certification | ISO9001, SGS |
| Available Material | SS304,SS304L SS316,SS316L |
| Pressure | Medium Pressure |
| Temperature of Media | Normal Temperature |
| Available Standard | ISO,DIN,3A,SMS |
