Explosion Proof Hygienic Ball Valves , Pneumatic Operated Ball
Valve 3/4" ASME BPE
Pneumatic actuator
Double acting: Air to open, air to close, air supply failure to
keep the current position
Single acting air to open type: Air to open, interrupt air to
close, air failure to close
Single acting air to close: Air to close, interrupt air to open,
air failure to open
Optional accessory: Reversing solenoid valve, limit switch box, air
filter reducing valve, positioner, handle manual, lock up valve
Electrical part can be chose explosion-proof type
Match with 0-90° rotation pneumatic actuator, can be implement the
following flow chart:
L-type:
T-type:
(Mainly has four kinds of flow directions, please select the
sutibale one)
Fitting ends :
BS, DIN, SMS, A270, Weld ends, Male ends and Clamp ends
Working pressure :
* -0.9 to 10 Bar for cast body
* -0.9 to 20 Bar for forged body
Working temperature :
-10oC up to 150oC
Valve line includes, ball, butterfly, check, seat, long stroke, mix
proof, PMO, diaphragm and sampling. All valves can be supplied with
a variety of actuation and control packages.
Sanitary pump line includes both centrifugal and positive
displacement pumps.
Stainless Steel Sanitary Tubing and Tube Fittings Highlights:
Valve line includes, ball, butterfly, check, seat, long stroke, mix
proof, PMO, diaphragm and sampling. All valves can be supplied with
a variety of actuation and control packages.
Sanitary pump line includes both centrifugal and positive
displacement pumps.
Alloy: T304 or T316L
Sizes: 1.50", 2.00", 3.00" OD
Seats: EPDM or Silicone
Finish: Polish to a 32 Ra ID/OD
Handle Interchanges to either side
Field Serviceable
100% Hydraulic Pressure Tested
Economical Price for all sizes from 1.5" -- 4"
| Steel material | Product wetted steel parts |
AISI 304 or 316L
| Provided with material inspection report |
| Other steel parts | AISI 304 |
| Seal material | Standard | Teflon (PTFE) | All seal materials comply with FDA 21CFR117.2600 |
| Options | N/A |
| Pressure | Working pressure | ≤145psi (10bar) |
| Supply pressure for air actuator | 70 ~ 116psi (5 ~ 8bar) |
| Temperature | Working temperature | -4 ~ 302°F (-20 ~ 150°C), -22 ~ 392°F (-30 ~ 200°C) option. |
| Surface treatment | Inside surface treatment | Ra 16 ~ 32µin (0.4 ~ 0.8µm) |
| Outside surface treatment | Ra 32 ~ 64µin (0.8 ~ 1.6µm) |
| Connection | End connections can be butt-welded, sanitary clamp, male and female
threaded, flanged, I-line or others upon request. |
| OUTSIDE DIAMETER (MM) | WALL- THICKNESS (MM) | NOMINAL OUTSIDE DIAMETER | NOMINAL WALL THICKNESS | DIMENSIONAL STANDARD |
|---|
| 6,35 | 0,89 | 1/4" | 0,035" | ASME BPE |
| 9,53 | 0,89 | 3/8" | 0,035" | ASME BPE |
| 12,70 | 1,65 | 1/2" | 0,065" | ASME BPE |
| 19,05 | 1,65 | 3/4" | 0,065" | ASME BPE |
| 25,40 | 1,65 | 1" | 0,065" | ASME BPE |
| 38,10 | 1,65 | 1 1/2" | 0,065" | ASME BPE |
| 50,80 | 1,65 | 2" | 0,065" | ASME BPE |
| 63,50 | 1,65 | 2 1/2" | 0,065" | ASME BPE |
| 76,20 | 1,65 | 3" | 0,065" | ASME BPE |
| 101,60 | 2,11 | 4" | 0,083" | ASME BPE |
| 152,40 | 2,77 | 6" | 0,109" | ASME BPE |
