Pharmaceutical Industry 3A TP 304 Sanitary Sample Valves , Aseptic
Sample Port Valve
Application
stainless steel aseptic sampling valves are used in the food,
dairy, brewery, winery and many other hygienic industries.
Materials
Materials: AISI-316L
Size: DN8
Diaphragm: Silicone (for standard valve), EPDM (for valve with
micro type connector)
Standard Design
Aseptic sampling valve is made from three parts: valve body, valve
head and one piece of diaphragm. A rubber diaphragm valve is put at
the axis of valve head, acting as an extensible valve core.
- End connections can be welded, clamped or threaded, only one size
DN8 available.
- Handle type: rotary handle, key handle
- Valve open: sampling valve close: sterilization
Sanitary sample valve is a type of valve used in process industries
that allows taking a representative portion of a fluid (gases,
liquids, fluidized, solids, or slurries) to test (e.g. by physical
measurements, chemical analysis, microbiological examination),
typically for the purposes of identification, quality control, or
regulatory assessment. It is a valve used for sampling.
HYHAU Valves series Sample valves are used in piping systems or on
tanks for sampling. It can also be assembled at the bottom of the
tank or pipeline for residue drain.
Sanitary Solutions is your source for a T304 Sanitary Sample Valve
primarily found in the Beverage, Brewery, Pharmaceutical, Tank and
Winery Industries. Our TP304 Sanitary Sample Valve is clamp end
with either a 3/8" or 1/2" spout depending on the size needed. As
for the surface finish of the valve, our valve is polished to meet
sanitary standards.
Technical Specification
Nominal Pressure:
Max. product pressure: 87psi (6bar)
Temperature:
Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the
diaphragm. The diaphragm should be replaced after 100 times
samplings or sterilizations.
Material:
Stainless Steel 304,316L or en.1.4301, 1.4404 forged.
Strength:
- Material of stainless steel 316L and 1.4404 is from reputed mill to
guarantee the chemical composition and mechanical properties.
Material certificate will be submitted follow to orders.
- Forged valve body and disc to control the leakage and visual.
- Superior facilities and good experiences for fabrication.
- In ability to improve and develop new design.
- Fast delivery is possible to meet your needs well in time.
- Low cost from bulk production will reduce your budget and improve
your business.
- Small quantity available.
Quality & Inspection:
- PMI test to verify material grade
- Dimension controlling during fabricating and finished
- Visual and surface 100% examination before shipment
- Packed in carton box firstly, then in wooden case
- Third party inspection available.
| General Specifications of Sanitary Sampling Valve |
| Max. Pressure | 0~6 bar (600Kpa) |
| Continuous Working Temperature | -10°C ~ +121°C(EPDM) |
| Sterilization Temperature | 150°C (Max 20min) |
| Internal Surface Finish | R0.8m |
| External Surface Finish | R1.6m |
| Connection Standards | DIN, SMS, 3A, ISO |
| Connection Methods | Welding, Clamp, Threading |
| Material |
| Product Wetted | 304 (1.4301) or 316L (1.4404) |
| Other Steel Parts | 304 (1.4301) |
| EN 10204 3.1B certificate is available on request. |
| Membrane | MVQ EPDM |
| Options | FPM, Silicone, NBR |
| All seal materials comply with FDA 177.2600. |
